![]() They all have inputs and outputs however some of them may offer filters, level control, polarity, etc. You might see different reamp boxes and think that there are various types of boxes that do different things but that’s not true.Īlthough various reamp boxes exist all of them do the same thing. ![]() Many people think that they are the same but it’s not true. A DI box converts an unbalanced signal to a balanced signal. That becomes apparent when you want to reamp your instruments.Īlso, it’s important to know that this device does the opposite of what a DI box does. ![]() The reamp box just covers the sound but the important thing is what you can do with it. And there are many great reamp boxes with additional features. The main features of it are input and output and that’s all you need to start reamping. In simple words, a reamp box is an audio converter that converts a balanced, low-impedance signal to an unbalanced, high-impedance signal. In this post, you will learn what a reamp box is, what it does, and how it works. But don’t be afraid because I’m going to tell you every detail about reamp boxes. If you are new to recording there is a big chance that you don’t know what it is and what it does. A little magical box that helps you with reamping guitars or other instruments. There are mono 1/4'' jack to XLR male though, which don't need modification - maybe someone here can confirm that they work as well.I’m sure you’ve heard about reamp boxes. Without modifying this type of cable (for this purpose) you get a weak signal. I'm sorry that I don't remember but I think I soldered one of the tips to sleeve/ground (on the 1/4'' jack). ![]() But I have also tried connecting headphone output to the Palmer box, by using this cable that I modified: I normally connect BFP's XLR outputs to Palmer with a short mic cable. I didn't like how Radial color the sound. However, I prefer using my Palmer Daccapo for reamping. I have tried connecting BFP's headphone output directly to my guitar amp with a standard guitar cable and it works. You just need the right cable.Ī reamp box is also not super necessary. This way you can keep your monitors connected to the BF Pro, and keep the balanced connections throughout your signal chain.Ĭonnecting your BFP's headphone output to a reamp box should work perfect. For example you can buy the Behringer ADA8200(A/D and D/A 44/48KHz only).īF Pro ADAT Out1 -> Behringer XLR Out1 -> Radial -> Amp -> Mic -> BF Pro XLR Input 1(or 2) - DAW. Or you can buy an external D/A Converter, connect it using your BF Pro Optical Out(SPDIF or ADAT) and route the signal through one of its outputs to the Radial. This is the inexpensive solution.īF Pro XLR Out1(or 2) -> Radial -> Amp -> Mic -> BF Pro XLR Input 1(or 2) -> DAW You need to use one of the XLR Outs of your BF Pro.īut if you don't want to disconnect your monitor every time, you can use the Headphones Out with a TRS(stereo) to two TS(mono) cable, to connect your monitors with the cost of loosing the balanced connection. The BF Pro's Headphones Out is a Stereo Output, and as such, you cannot connect it to the Radial. The Radial, as every re-amping box, is used to turn a MONO line-level balanced signal to an un-balanced instrument-line level signal, suitable for connecting it to a guitar amp.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |